OPTIONAL CLASS A OUTPUT CONVERTER MODULE.
Product Overview
The PS Series is a remote power supply line from FireLite Alarms and is a direct replacement for the FCPS-24FS6/8 Series. The FLPS6(C) is a 6 amp and the FL-PS10(C) is a 10 amp, remote power supply with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet.
Features
Up to five (6 amp model) or seven (10 amp model) independently-configurable, power-limited output circuits for:
Class B and/or Class A NACs
Class B and/or Class A resettable or non-resettable 24V auxiliary power
door holder power
Converts from Class B to Class A wiring without losing any outputs using the ZNAC-PS converter card (sold separately)
Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power
Configurable for ANSI® Temporal 3 or Temporal 4 coded output
UL-Listed NAC synchronization using System Sensor®, Wheelock®, Gentex®, or AMSECO® appliances
Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet
Ability to cascade up to four power supplies
Two (6 amp model) or three (10 amp model) fully-isolated input/ control circuits which can be programmed to any output
Two Form C normally-closed trouble relays for AC Trouble and General Trouble, Ground Fault relay available on Canadian models only
6 or 10 amp full load output, respectively, with 3 A maximum/circuit
Individual NAC power and trouble LEDs for diagnostic efficiency
Trouble history modes for diagnostic support
Wide range end-of-line supervision value (normal: 2K-27K ohms)
Selectable earth fault detection (enable or disable)
AC trouble report delay timer
Completely configurable via onboard DIP switches, no extra software required
Self-contained in compact, locking cabinet constructed of heavy gauge steel with a corrosion-resistant powder coat chip and scratch-resistant finish
Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring
Includes integral battery charger capable of charging up to 33 AH batteries
Cabinet can house two 7 AH or 18 AH batteries
Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger
Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire
Works with any UL 864 FACP which utilizes an industry-standard reverse-polarity notification circuit
Optional devices include addressable control, monitor, and relay modules and power-supervision relay (EOLR-1)
Main Features
Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power
Ability to cascade up to four power supplies
Self-contained in compact, locking cabinet constructed of heavy gauge steel with a corrosion-resistant powder coat chip and scratch-resistant finish
General Information
Name: Fire-Lite ZNAC-PS Class A Output Converter MOD-PS Series Power Supply, Honeywell International, Inc, Fire-Lite Alarms by Honeywell
Category: Fire-Lite Alarms by Honeywell, Fire, Fire Relays & Power, Power Supplies
UPC Code: 783008113322
Country of Origin: United States. Country of origin is subject to change.
Our Client Tier System is designed to reward you with better discounts as your business grows.
Every new account begins at our Base Tier, ensuring you receive value from your very first purchase.
As your yearly volume increases, so does your opportunity to save.
Our new B2B (Company) Accounts offer a comprehensive solution for companies seeking to streamline their procurement process and empower their teams.
With a B2B account on our website, your company can link multiple employee accounts under one central business panel. This integration provides a unified view of all transactions, invoices, and benefits, ensuring efficient management and coordination across your organization.
